Are you tired of that annoying drip, drip, drip coming from your bath tap? Not only is a leaky tap wasteful, but it can also be a sign of a more serious issue. Don’t worry, with a few simple steps, you can fix that leak yourself and save money on a costly plumber. Follow these 10 steps to get your bath tap back in working order.
Step 1: Gather Your Tools
Before you begin, make sure you have all the necessary tools on hand. You will likely need an adjustable wrench, a screwdriver, plumber’s tape, and a replacement washer or O-ring.
Step 2: Turn Off the Water Supply
Locate the water shutoff valves under the sink or behind the wall. Turn the valves clockwise to shut off the water supply to the tap.
Step 3: Remove the Handle
Using an adjustable wrench, carefully remove the handle of the tap. This will give you access to the inner workings of the tap.
Step 4: Identify the Source of the Leak
Inspect the components inside the tap to determine the source of the leak. It could be a worn out washer or O-ring that needs to be replaced.
Step 5: Replace the Washer or O-Ring
Remove the old washer or O-ring and replace it with a new one. Be sure to use plumber’s tape to ensure a tight seal.
Step 6: Reassemble the Tap
Once the new washer or O-ring is in place, carefully reassemble the tap. Make sure all components are securely in place before moving on to the next step.
Step 7: Turn On the Water Supply
Turn the water supply back on and test the tap for leaks. If the leak persists, you may need to go back and adjust the components inside the tap.
Step 8: Check for Proper Functionality
Test the tap to make sure it is functioning properly. Make sure the handle turns smoothly and that there are no more leaks coming from the tap.
Step 9: Clean Up
Clean up any excess water or debris around the tap. It’s important to keep the area clean to prevent future leaks.
Step 10: Pat Yourself on the Back
Congratulations! You have successfully fixed the leak in your bath tap. Not only have you saved money on a plumber, but you have also gained valuable DIY skills.
Remember, if at any point you feel unsure or uncomfortable with the repair process, it’s always best to call a professional plumber for assistance.
Conclusion
Fixing a leak in your bath tap doesn’t have to be a daunting task. By following these 10 simple steps, you can easily solve the problem and save money in the process. Have you ever fixed a leaky tap yourself? Share your experience in the comments below!